Set Mode: Display Menu Operations; Setting What To Display Using The Smart Navigation Function; Setting The Compass Display; Setting The Search Channels For The Band Scope Function - Yaesu FT3DR Operating Manual

1 Setting What to Display Using the Smart Navigation Function

Set what to display on the smart navigation screen.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Touch [1 TARGET LOCATION].
3. Rotate the DIAL knob to select what is displayed on the screen.
COMPASS
NUMERIC
Remark The default setting: COMPASS

2 Setting the Compass Display

Set the compass display.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Touch [2 COMPASS].
3. Rotate the DIAL knob to select the desired setting.
HEADING UP
NORTH UP
Remark The default setting: HEADING UP

3 Setting the Search Channels for the BAND SCOPE Function

Set the number of channels to be displayed for the band scope when the BAND SCOPE
function is used.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Touch [3 BAND SCOPE].
3. Rotate the DIAL knob to select the number of channels to search for.
19ch / 39ch / 79ch
Remark The default setting: 39ch

4 Changing the Lighting Condition

Change the LCD and key lighting condition.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Touch [4 LAMP].
3. Rotate the DIAL knob to select [KEY], then press the [DISP] key.
4. Rotate the DIAL knob to select the lighting condition.
2 SEC (KEY) to
180 SEC (KEY)
CONTINUOUS
OFF
Remark The default setting: 30 SEC (KEY)
5. Press the [DISP] key.
6. Rotate the DIAL knob to select [SAVE], then press the [DISP] key.

Set Mode: DISPLAY Menu Operations

Displays the compass.
Displays the latitude and longitude.
The heading direction is indicated at the top of the compass.
The north direction is indicated at the top of the compass.
When the DIAL is rotated or a key is pressed, the LCD and key
lights remain illuminated for the set time.
The LCD and key lights remain illuminated.
The LCD and keys do not light up.
63