Touch Screen Display - Yaesu FT3DR Operating Manual

Touch Screen Display

Lights when Auto Power Off is activated
Lights when AF DUAL function is enabled
Lights when the mute function is activated
Battery condition
Displays mode
A-band display area
A-band icon
B-band display area
B-band icon
z Status Bar
The battery condition is displayed in 8 steps.
: Full battery power
: Battery is depleted. Charge battery.
: (When blinking) Charge battery immediately.
Appears when the lock function is enabled.
Appears when the Mute function for B-band is enabled.
Appears when the AF DUAL function is enabled.
Appears when the APO (Automatic Power-Off) function is enabled.
Appears when the DTMF Autodialer function is activated.
Appears when the Built-in GPS function is activated.
Appears: Satellites are acquired.
Blinks:
Appears when the Voice recording function is activated.
Appears when the GPS Log function is enabled.
Appears when a microSD card is inserted.
Appears when the Bluetooth function is activated.
Appears: Bluetooth device is connected.
Blinks:
LOCK
Satellites cannot be acquired.
Bluetooth device not connected.
Lights when DTMF function is enabled
Lights when GPS is acquired
Lights when GPS Log Function is enabled
Lights when Voice recording function is activated
Lights when a microSD memory card is inserted
Lights when Bluetooth function is activated
Communication mode selection (AMS/DN/VW/FM)
Communication mode selected by AMS (AMS/DN/VW/FM)
Press: Function menu screen
Press and hold: Memory write
Display of settings such as DG-ID/TONE
Communication Mode
Squelch/Volume Bar Graph (A-band)
Display of settings such as DG-ID/TONE
Displays operation mode
Squelch/Volume Bar Graph (B-band)
7