Setting A Time Interval For Saving Gps Position Information; Permitting/Prohibiting Transfer Of Home Channel Frequency To Vfo; Setting The Lock Function - Yaesu FT3DR Operating Manual

7 Setting a Time Interval for Saving GPS Position Information

Set the interval at which the current position GPS information is saved to the microSD
memory card.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [7 GPS LOG].
3. Rotate the DIAL knob to select the time interval:
OFF / 1 SEC / 2 SEC / 5 SEC /10 SEC / 30 SEC / 60 SEC
4. If OFF is selected, no GPS Information is saved onto the microSD memory card
Remark The default setting: OFF
• Data saved onto the microSD memory card is saved in GPSyymmddhhmmss.LOG format.
• Saved data may be viewed by using OEM PC applications*.
* Yaesu does not provide technical support for PC applications.

8 Permitting/Prohibiting Transfer of Home Channel Frequency to VFO

Set whether or not to permit tuning off of the home channel and transfer to the VFO.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [8 HOME VFO].
3. Rotate the DIAL knob to select the desired setting.
ENABLE
DISABLE
Remark The default setting: ENABLE

9 Setting the LOCK Function

Select keys/DIAL to which you want to apply the lock function.
1. Press and hold the [DISP] key, and then touch [CONFIG].
2. Touch [9 LOCK].
3. Rotate the DIAL knob to select the desired setting.
KEY & DIAL Locks the DIAL and keys on the front side of the transceiver.
PTT
KEY & PTT
DIAL & PTT Locks the DIAL and PTT switch.
ALL
KEY
DIAL
Remark The default setting: KEY & DIAL
Turning the DIAL knob in home channel transfers from the home
channel frequency to the VFO.
Turning the Dial on the home channel does not switch to the VFO.
Locks PTT switch.
Locks PTT switch and the keys on the front side of the transceiver.
Locks the DIAL, PTT switch and the keys on the front side of the
transceiver.
Locks the keys on the front side of the transceiver.
Locks the DIAL.
79