7. Rotate the DIAL knob to select the lighting status after the set illumination time
elapses.
OFF
ON
Remark
The default setting: OFF
When [KEY] is set to CONTINUOUS, regardless of the [SAVE] setting, the illumination stays
lit according to the LCD dimmer setting level.
5 Selecting the Display Language
Select the display language from Japanese and English.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Touch [5 LANGUAGE].
3. Rotate the DIAL knob to select the desired language.
JAPANESE
ENGLISH
Remark
The default setting: English
6 Adjusting the LCD Backlight and Key Button
Light Brightness Level
Adjust the brightness level of the LCD backlight and key button light.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Rotate the DIAL knob, then touch [6 LCD DIMMER]
3. Rotate the DIAL knob to select the desired brightness level.
4. Select from LEVEL 1 to LEVEL 6.
Remark
The default setting: LEVEL 6
7 Changing the Opening Message Displayed Immediately
after Power-on
You can select the message under the "YAESU" logo displayed when turning on the
transceiver.
1. Press and hold the [DISP] key, and then touch [DISPLAY].
2. Rotate the DIAL knob, then touch [7 OPENING MESSAGE].
3. Rotate the DIAL knob to select the desired message referring to the following table.
OFF
DC
MESSAGE
64
After the illumination time selected for [KEY] elapses, the lights
dim to [LEVEL 1] of the LCD dimmer setting.
After the illumination time selected for [KEY] elapses, lights
turn off.
Japanese is selected.
English is selected.
Displays the receive frequency instead of the opening message
immediately after turning on the power.
Displays the power-supply voltage and time when turning on the
power.
Displays a message comprising up to 16 characters when turning
on the power. Press the [DISP] key to switch the screen to the
message registration screen. See "Text input screen" on page
89 to input the message you want to display.