Yaesu FT3DR Operating Manual page 63

Set mode no. / item
10 APRS RINGER
11 APRS UNIT
12 APRS TX DELAY
13 BEACON INFO
14 BEACON INTERVAL
15 BEACON STATUS
TEXT
16 BEACON TX
17 COM PORT SETTING
18 DIGI PATH
19 GPS SETUP
20 GPS POWER
Description
Set the bell ring on/off when a beacon
or message is received.
Select the units for APRS display.
Set the data sending delay time.
Set the transmission beacon
information.
Set a beacon automatic sending
interval.
Input setting for status text.
Select automatic or manual sending
of beacon.
Set the COM port.
Set the digital repeater route.
Select a datum used for the GPS
function.
Turn the GPS function ON/OFF.
Selectable options
(Options in bold are the default settings)
Mic-E: ON / OFF
POSITION: ON / OFF
WEATHER: ON / OFF
OBJECT: ON / OFF
ITEM: ON / OFF
STATUS: ON / OFF
OTHER: ON / OFF
MY PACKET: ON / OFF
MSG: ON / OFF
GRP: ON / OFF
BLN: ON / OFF
MY MSG: ON / OFF
DUP.BCN: ON / OFF
DUP.MSG: ON / OFF
ACK.REJ: ON / OFF
OTHER MSG: ON / OFF
TX BCN: ON / OFF
TX MSG: ON / OFF
POSITION: MM.MM' / MM'SS"
DISTANCE: km / mile
SPEED: km/h / knot / mph
ALTITUDE: m / ft
TEMP: °C / °F
RAIN: mm / inch
WIND: m/s / mph
100ms to 1000ms 300ms
AMBIGUITY: OFF / 1 digit / 2digit / 3digit /
4digit
SPD/CSE: ON / OFF
ALTITUDE: ON / OFF
30sec / 1min / 2min / 3min / 5min / 10min /
15min / 20min / 30min / 60min
S.TXT: ON / OFF
TX RATE: 1/1 to 1/8
TEXT: Text 1 to Text 5
AUTO / MANUAL / (SMART)
STATUS: ON / OFF
SPEED: 4800 / 9600 / 19200 / 38400
INPUT: OFF / GPS
OUTPUT: OFF / GPS / WAY.P
WAYPOINT: NMEA9 / NMEA6 / NMEA7 /
NMEA8
Mic-E: ON / OFF
POSIT: ON / OFF
WEATHER: ON / OFF
OBJECT: ON / OFF
ITEM: ON / OFF
P1 OFF
P2(1) 1 WIDE1-1
P3(2) 1 WIDE2-1 / 2 WIDE2-1
P4(2) 1••••••--•• / 2••••••--••
P5(2) 1••••••--•• / 2••••••--••
P6(2) 1••••••--•• / 2••••••--••
P7(2) 1••••••--•• / 2••••••--••
P8(8) 1••••••--•• to 8••••••--••
DATUM: WGS-84 / Tokyo (Mean)
PINNING: ON / OFF
DGPS: ON / OFF
GPS ON / GPS OFF
61