Installing The Dc 5900 F; Installing The Base; Installing The Loudspeaker - Shure DDS 5900 Manual

DDS 5900 Digital Discussion System

Installing the DC 5900 F

Installing the Base

The DC 5900 base installs directly onto a table or podium.
1. Determine the location of the microphone and cut a hole with a diameter of 53 mm.
2. Use the base to mark the location for the screw and drill the holes.
3. Secure the base to the table with the screws.

Installing the Loudspeaker

1. Determine the location of the speaker (<1m from the base to accommodate the cable) and cut a hole with a 53
mm diameter.
2. Insert the loudspeaker into the hole and connect the loudspeaker cable to the base unit. Make sure the cable is
not pinched.
3. Align the loudspeaker with the base unit. Mark the location for the screws, spaced exactly 78 mm apart.
4. Drill the holes and secure the speaker to the table with the screws.
5. Snap the grill onto the loudspeaker cabinet.
6. Connect the cable from the loudspeaker to the DC 5900 F base
Shure Incorporated
30/96