Dds 5900 System - Shure DDS 5900 Manual

DDS 5900 Digital Discussion System Shure Incorporated
Indicates the volume of loudspeakers for all Discussion Units.
<volume> The volume of the loudspeakers ranges from -41 to 0. The value -41 indicates the volume is Off. Values
from -40 to 0 indicate attenuation in dB.
Line Input 1 Gain
line_input_gain_1 <gain><CR>
Indicates the gain of the line input 1 signal.
<gain> Adjust line input gain to 0 or 10 dB
Line Output Level (A-D)
line_output_level <output> <level><CR>
Adjusts the level of the line output signal.
<output> Indicates which output is being controlled. Possible values are: 'A', 'B', 'C' or 'D'.
<level> The level of the line output ranges from -41 to 0. The value -41 indicates the output is zero. Values from
-40 to 0 indicate attenuation in dB.
Define Audio Path
audio_path <path> <on/off><CR>
This command defines audio connections in the system.
<path> Indicates which connection is being controlled. Possible values are: 'mic_to_speaker', 'mic_to_floor',
'linein_1_to_speaker', 'linein_1_to_lineout_A' or 'linein_1_to_floor'.
<on/off> Indicates whether the audio is being routed from microphones/lineinput_1 to speakers/lineoutput_A/floor.
Audio Status Complete
audio_status_done<CR>
This command terminates audio status streaming.
Technical Specifications

DDS 5900 System

The microphone system conforms to IEC 60914, the international standard for discussion systems. However the
functionality of an Interpreter Unit differs from the standard.
Audio performance specifications are measured from the audio input of a Discussion Unit to the headphone output
of a Discussion Unit.
77/96