Shure DDS 5900 Manual page 67

DDS 5900 Digital Discussion System
Generated System Report
Firmware Update
Use the Firmware Update Utility (FUU) to update the system firmware.
1. Make sure the system is on and operating properly.
2. Download the latest firmware from the Shure website. The FUU is bundled with the firmware download.
3. Install the application and save the firmware folder to the computer.
4. Launch the application.
5. Select the proper firmware library for the equipment.
1. Close the missing dialog box
2. Navigate to the FUU library (FUU_upgrade_library)
3. Select the open button to use this folder.
6. Assign the connection method for the computer and equipment and select the OK button to exit the setup win-
dow:
◦ Ethernet: Type the IP address of the CCU and use IP port 3142.
7. Information about the CCU and all connected units display in the main window.
8. Select the desired firmware release (typically the highest/latest) in the Selected Release Id drop-down list.
9. Select the Upgrade System button to begin the firmware update process. A status window will appear and show
the progress of the firmware upgrade.
External Control Protocol
The DIS-CCU features an Ethernet connection for the purpose of providing an interface to control and monitor the
system. By setting up a simple (raw) TCP/IP socket connection to the DIS-CCU Central Unit, control options are
available.
This section describes the TCP/IP raw socket protocol for communicating with the DDS 5900 Discussion System.
This protocol provides a short set of commands, enabling a third-party control application to monitor and/or control
system status of a DDS 5900 Discussion System.
Shure Incorporated
67/96