Shure DDS 5900 Manual page 24

DDS 5900 Digital Discussion System
Recording Audio
Mixer or DSP
Connect a mixer to the CCU analog outputs to control individual microphone volume or equalization. Use the
browser interface to buss units to groups and assign them to the specific output (A-H).
To return the audio to the DDS 5900 system:
1. Connect the output of the external device to Audio Input 1 on the CCU
2. Route the Input 1 audio by selecting the Loudspeaker and Ch. 0 and deselecting Out A (Group)
>
Input Control
3. To avoid a feedback loop, turn off the internal Floor routing by deselecting Loudspeaker and Ch. 0:
Input Control
>
Inserting a Mixer or DSP
Audio In 1
Floor
Shure Incorporated
>
Audio
>
Audio
24/96