Audio Source For The Loudspeaker And Headphones - Shure DDS 5900 Manual

DDS 5900 Digital Discussion System
◦ Channel 2
3. Adjust the volume of the headphones using the + or - buttons on the unit.

Audio Source for the Loudspeaker and Headphones

By default all microphones are routed to loudspeaker and headphone mixes.
To change the audio source:
1. Route microphones to Group A to add them to the floor mix (all selected by default)
2. Select the audio sources for the loudspeaker and Channel 0 (headphone)
◦ Floor (default)
◦ Audio In 1
◦ Audio In 2
Shure Incorporated
>
Audio Group Setup
>
Audio Input Control
:
50/96