Audio Control - Shure DDS 5900 Manual

DDS 5900 Digital Discussion System Shure Incorporated
Microphone Status Complete
mic_status_done<CR>
Provides notification that complete system status has been sent.
Seat State
seat_state <seat number> <seat state><CR>
Provides seat state information.
This information is sent from the CCU to an External Control, when the state of a seat changes – a seat becomes
passive or active.
<seat number> The seat number identification of a discussion unit. An integer ranging from 1 to 65535.
< seat state > The current state of the seat. This can be "active" or "passive"
Command error
command_error <error text><CR>
The CCU has received an unknown command.
<error text> is a text explaining the error.
Examples:
command_error unknown command<CR>
command_error syntax error<CR>

Audio Control

Commands from External Control to DIS-CCU
Set Loudspeaker Volume
loudspeaker_volume <volume><CR>
Sets the volume of the loudspeakers for all Discussion Units.
<volume> The volume of the loudspeakers ranges from -41 to 0. The value -41 indicates the speaker is Off. Values
from -40 to 0 indicates the attenuation in dB.
The CCU responds to this command by issuing the loudspeaker_volume command.
Set Line Input 1 Gain
line_input_gain_1 <gain><CR>
75/96