Lift-Off Table - Fiat Capron T58 Manual

7
Living
Conversion to bed
foundation:
7.6.2
Moving the table:
Adjusting table height,
conversion to bed
foundation:
56
Fig. 40 Bed foundation
The table's fold-out leg enables it to be used as a bed foundation.
Slightly raise the front of the table top (Fig. 40,1).
Press the release knob (Fig. 40,2) and fold the lower part of the fold-out leg
(Fig. 40,3) by 90°.
Swivel the table top approx. 45° upward and remove the table from the
retainer.
Insert the table into the lower retainer and rest it on the table leg hinge.

Lift-off table

Fig. 41 Moving the lift-off table
Swivel lever (Fig. 41,2) downwards until it is in a downward vertical posi-
tion.
Move the table top to the desired position.
Swivel lever (Fig. 41,2) upwards until the table top is fastened.
Pull the locking handle (Fig. 41,1).
Push the table top downwards to the desired height.
Without any pressure, the table top will slide upwards by spring force.
Release the locking handle (Fig. 41,1). The table top remains at the
adjusted height.
EN
Capron - 04-17 - CAP-0017-01