Roman Shade For Windscreen And Side Panes; Pvc-Floor Covering - Fiat Capron T58 Manual

4
Before the journey
Emergency operation
4.5
Securing Roman shade
(windscreen):
Securing Roman shade
(side panes):
4.6
26
If the electric drive of the entrance step fails, follow the directions below to
manually retract the entrance step:
Pull out the securing splint from the connection to the engine.
Release the rectangular connection to the engine using a suitable object
(e.g. a screwdriver).
Push in the entrance step by hand and secure it using a suitable device
(e.g. a string).
Contact customer service.

Roman shade for windscreen and side panes

Fig. 2 Roman shade for windscreen
(closed)
Push the respective handle (Fig. 2,1) of both halves of the Roman shade
(Fig. 2,2) outwards, underneath the cover on the A column.
Fix the handles respectively by plugging them onto the cover (Fig. 2,3).
Thus, the windscreen shade is secured against closing involuntarily during
the journey.
Push the handle (Fig. 3,1) of the Roman shade into the cap (Fig. 3,2).
Thus, the Roman shade is secured against closing involuntarily.

PVC-floor covering

Gas pipes and electric lines are laid in the floor. Never drill holes in the
floor or insert any screws. That could cause a gas explosion, an elec-
trical shock or a short circuit due to damage to a cable.
Shoes with pointed heels can leave permanent impressions in the PVC-
floor covering. Never wear shoes with pointed heels in the vehicle.
Rubber mats or long exposure to ketchup, carrot juice, ink, blood or lipstick
can discolour the PVC-floor covering. If possible, remove stains from the
floor immediately.
Fig. 3 Roman shade for side pane
(closed)
Capron - 04-17 - CAP-0017-01
EN