Front Lights - Fiat Capron T58 Manual

13
Maintenance
Types of bulbs
13.3.1
Model T, model A
Model I
130
Different types of bulbs are used in the vehicle. Below, we have described how
to change the different types of bulbs.
Fig. 118 Types of bulbs
Pos. in Fixture type/bulb
Fig. 118 type
1 Plug-in fixture
2 Bayonet socket
3 Cylindrical bulbs
4 Halogen bulb

Front lights

The lamps for low beam, main beam and parking light as well as for the direc-
tion indicator are part of the basic vehicle. Replacement of light bulbs is
described in the instruction manual of the base vehicle.
The bulbs for headlights, daytime running light, and direction indicator are
changed from the engine compartment.
The bulb in the direction indicator on the side is changed from outside.
Fig. 119 Front lighting (seen from
engine compartment)
Changing
To remove, pull out the bulb
To mount, push the bulb into the socket
with gentle pressure
To remove, press the bulb down and turn
in an anticlockwise direction
To insert, place the bulb in the socket and
turn in a clockwise direction
To remove and to insert, carefully bend the
contacts of the lamp holder outwards
To remove, release retaining springs
After inserting, hook the retaining springs
again
1 High/low beam headlight (H7, 12 V/
55 W)
2 Daytime running light (12 V/21 W)
3 Direction indicator (12 V/21 W
orange)
Capron - 04-17 - CAP-0017-01
EN