Front Bench Seat With Divan - Fiat Capron T58 Manual

7
Living
7.10.2
64

Front bench seat with divan

Do not stand on the bedding box extension when it is pulled out. The bed-
ding box extension may be damaged thereby.
Fig. 57 Prior to conversion
Fig. 59 After conversion
Depending on the model, insert an additional floor plate at the step to the
driver's area to obtain an even seating area.
Remove the back cushion and the seat cushion of the divan and lay them
aside.
Convert the suspension table into a bed foundation (see section 7.6.1).
Fold the seat base of the divan upwards.
Pull up the bedding box extension on the divan.
Pull out the bedding box extension on the divan all the way.
Fold down the seat base of the divan.
Unfold the seat base of the divan.
Place the seat cushion of the divan on the bedding box extension of the
divan.
Place the back cushion of the divan between the seat cushion and the exte-
rior wall.
Lay the seat cushion of the front bench seat on the table top.
Place two short additional cushions in front of the seat cushion.
Lay the long additional cushion onto the bedding box extension.
Fig. 58 During conversion
Capron - 04-17 - CAP-0017-01
EN