Maintenance; Inspection Work; Maintenance Work; Replacing Bulbs, External - Fiat Capron T58 Manual

13.1
13.2
13.3
EN
Capron - 04-17 - CAP-0017-01
Chapter overview
This chapter contains instructions about inspection and maintenance work
concerning the vehicle.
The maintenance instructions address the following topics:
replacing light bulbs
At the end of the chapter you will find important instructions on how to obtain
spare parts.

Inspection work

Like any technical appliance, the vehicle must be inspected at regular inter-
vals.
This inspection work must be carried out by qualified personnel.
Special technical knowledge, which cannot be taught within the framework of
this instruction manual, is required for these tasks. Personnel with this tech-
nical knowledge are available for assistance at all authorised dealers and
service centres. Their experience and regular technical instruction by the fac-
tory as well as equipment and tools guarantee expert and up-to-date inspec-
tion of the vehicle.
Have chassis inspections confirmed in the chassis manufacturer's customer
service booklet.

Maintenance work

As with every machine, this vehicle requires maintenance. The extent and fre-
quency of the maintenance work required depend on conditions of operation
and use. More difficult operating conditions make it necessary to service the
vehicle more often.
Have the base vehicle and the appliances serviced at the intervals specified
in the corresponding instruction manuals.

Replacing bulbs, external

Bulbs and light fittings can be extremely hot. Therefore, allow lights to
cool down before changing bulbs.
Store bulbs in a safe place inaccessible to children.
Do not use any bulb that has been dropped or which shows scratches in
its glass. The bulb might burst.
A new bulb should not be touched with the fingers. Use a cloth when
installing the new bulb.
Only use bulbs of the same type and with the correct wattage.
If LEDs in lights are defect, contact an authorised dealer or service centre.
13

Maintenance

13Maintenance
129