Steady Legs; Connection; Refrigerator - Fiat Capron T58 Manual

6
Pitching the motorhome
6.4.2
Extending:
Retracting:
6.5
6.6
40

Steady legs

Depending on the model, the hexagonal nut has a joint, which can be used
to bring the attached socket spanner into a more convenient position for
turning.
In order to ensure their correct function, clean and grease the interior tubes of
the steady legs regularly.
The length of the steady legs can be adjusted according to the model.
Fig. 14 Steady leg
Place the socket spanner on the hexagon nut (Fig. 14,1) and rotate until
the steady leg is in a perpendicular downward position.
If the length of the steady leg can be adjusted, remove the splint (Fig. 14,4)
out of the support foot extension (Fig. 14,5).
Pull out the support foot extension until it has reached the required length.
Insert the splint in the support foot extension.
Rotate the hexagonal nut until the steady leg rests completely on the
ground and the vehicle is in a horizontal position.
Place the socket spanner on the hexagon nut (Fig. 14,1) and rotate until
the steady leg is clear of the ground.
If the length of the steady leg can be adjusted, remove the splint (Fig. 14,4)
out of the support foot extension (Fig. 14,5).
Push in the support foot extension (Fig. 14,5) and insert the splint
(Fig. 14,4) in the drilled hole in the support foot extension.
Rotate the hexagonal nut (Fig. 14,1) until the steady leg has swung
upwards and the guide (Fig. 14,2) has reached the very end of the slot
(Fig. 14,3).
Before commencing the journey, observe the following: Are all steady legs
and support foot extensions retracted completely and secured with the
splint?
240 V connection
The vehicle can be connected to a 240 V power supply (see chapter 9).

Refrigerator

The 12 V operation of the refrigerator is only possible when the vehicle engine
is running. When the vehicle engine is switched off, switch the refrigerator to
240 V operation or gas operation.
EN
Capron - 04-17 - CAP-0017-01