Roman Shade And Insect Screen - Fiat Capron T58 Manual

7
Living
7.4.6
Roman shade
Closing:
Opening:
Insect screen
Closing:
Opening:
50
To place the sunroof into the "continuous ventilation" position:
Turn the catch lever (Fig. 29,3) a quarter turn towards the centre of the
window.
Slightly open the sunroof outwards.
Return the catch lever to its initial position. The locking catch (Fig. 29,2)
has to be moved into the recess of window catch (Fig. 29,1).
During the journey, the sunroof may not be in "continuous ventilation" position.
If it rains, the "continuous ventilation" sunroof position could lead to splashing
water penetrating the living area. Therefore, close the sunroof completely.

Roman shade and insect screen

Fig. 30 Sunroof
The Roman shade (Fig. 30,3) is permanently connected to the insect screen
(Fig. 30,1).
Hold the Roman shade in the centre of the bottom rod (Fig. 30,4) and care-
fully draw it downwards.
Release the Roman shade at the desired position. The Roman shade will
stay in that position.
Slowly return the Roman shade to its initial position with the bottom rod
(Fig. 30,4).
The insect screen is permanently connected to the Roman shade. When the
insect screen is opened, the Roman shade is opened along with it.
Hold the insect screen at the centre of the bottom rod (Fig. 30,2) and care-
fully pull it downward as far as it goes.
Slowly return the insect screen on the bottom rod of the Roman shade
(Fig. 30,4).
EN
Capron - 04-17 - CAP-0017-01