Furuno MU-190 Operator's Manual page 13

1. Use the flush mounting template (supplied) to make a cutout in the mounting location.
2. Follow steps 2 to 6 in section 1.2.
3. Loosely fix the knobs (4 pcs.) to the hood fixing plates (19) from inside the plates.
4. Remove the binding head screws (M3x5, 6pcs.) and the side panel bases (6 pcs.) from the
flush mount panels 19 attached to the monitor unit.
Binding Head Screw (6 pcs.)
5. Attach the hood fixing plates (19) and the side panel bases to the right and left sides of the
monitor unit with the binding head screws (M3x8, 6pcs.)
Binding Head Screw (6 pcs.)
6. Press and rub folds on the hood with your hands to make creases clearly. The degree of
creases should be within 90° when the hood is opened.
Press and move your hands to
upward and downward several times.
Knob
Side Panel Base (6 pcs.)
Flush Mount Panel 19
Side Panel Base (6 pcs.)
Hood
Hood Fixing Plate (19)
Hood Fixing Plate (19)
Correct
Incorrect,
insufficient
4
1. MOUNTING, WIRING