Recording Over Existing Tracks; Marking Track Numbers While Recording - Sony MDS-W1 Operating Instructions Manual

Recording Over Existing Tracks

Follow the procedure below to record over existing
material just as you would on an analog cassette tape.
≠ AMS ±
§
EJECT
≠ ±
AMS
0 ) r
·
P p
·
=/+
= +
< >
0 )
NAME IN
NAME CHAR
MENU/NO YES CLEAR
1
Do Steps 1 to 7 in "Recording on an MD" on
pages 7 to 9.
2
Turn AMS (or press = or +) until the
number of the track to be recorded over appears.
3
To record from the start of the track, continue
from Step 8 in "Recording on an MD" on page 9.
z
While "Over Write" flashes in the display
The deck is recording over an existing track.
z
To record from the middle of the track
1 After Step 2 above, press · to start playback.
2 Press P where you want to start recording.
3 Continue from Step 8 in "Recording on an MD" on
page 9.
Note
You cannot record from the middle of an existing track when
"PGM" or "SHUF" is on.
§
EJECT
≠ ±
AMS
0 ) r
·
P p
P p
MUSIC SYNC
r
MD SYNC T.REC
REC LEVEL
MENU SELECT
Recording on MDs
Marking Track Numbers While
Recording
You can mark track numbers either manually or
automatically. By marking track numbers at specific
points, you can quickly locate the points later using the
AMS Function or Editing Functions.
r REC
≠ AMS ±
§
EJECT
≠ ±
AMS
0 ) r
· P p
MENU/NO A-INPUT
Marking track numbers manually
You can mark track numbers at any time while
recording on an MD.
Press r REC at the place you want to add a track mark
while recording.
Marking track numbers automatically
(Level Synchro Function)
The deck adds track marks differently in the following
cases:
• When recording from CDs or MDs with a digital
input selected by the A-INPUT or B-INPUT button
(when recording from a CD or MD connected
through a digital input connector, or when making a
digital recording between deck A and deck B):
The deck marks track numbers automatically.
However, the deck may not automatically mark track
numbers when recording from some CD players and
multi disc players.
• When you make an MD Synchro-Recording (see
page 11), the deck marks track numbers
automatically.
r REC
§
EJECT
≠ ±
AMS
0 ) r
· P p
B-INPUT
MENU/NO
(Continued)
EN
17