Sony MDS-W1 Operating Instructions Manual page 27

Repeating the current track
While the track you want to repeat is playing in
normal, Shuffle or Program Play, press REPEAT
several times until "REP 1" appears in the display.
If you select "REP 1" while the deck is stopped, the
deck repeats the next track to be played.
z
You can also use the controls on the deck to repeat
the current track
1 While the track you want to repeat is playing, press
MENU/NO twice to display SET UP menu.
2 Turn AMS to select "REPEAT", then press AMS.
3 Turn AMS to select "REPEAT 1", then press AMS.
To cancel repeat play, select "OFF" in Step 3 above.
Repeating a specific portion (a-b Repeat)
Z
You can play a specific portion of a track repeatedly.
This might be useful when you want to memorize
lyrics. Note that you can only repeat a portion within
the boundaries of a single track.
11 12 13 14
P Q R S
16 17 18 19
U V W X
21 22 23 24
Z – .
REPEAT A˜B
>
/ 25 ? ! (
REPEAT
OUTPUT
· P
= + r
< > MD SYNC
0 )
)
NAME IN
NAME CHAR
MENU/NO YES CLEAR
1
While playing a disc, press A˜B at the starting
point (point a) of the portion to be played
repeatedly.
"an" appears and "b" flashes in the display.
2
Continue playing the track or press ) until you
reach the ending point (point b), then press A˜B
again.
"a˜b" lights continuously. The deck starts to
play the specified portion repeatedly.
To cancel a-b Repeat
Press REPEAT, CLEAR or p.
Setting new starting and ending points
You can repeat the portion immediately after the
currently specified portion by changing the starting
and ending points.
1 Press A˜B while "a˜b" appears.
The current ending point b becomes the new
starting point a, "an" lights continuously, and "b"
flashes in the display.
2 Continue playing the track or press ) until you
reach the new ending point (point b), then press
A˜B again.
"a˜b" lights continuously and the deck starts
playing repeatedly the newly specified portion.
Playing MDs
15
T
20
Y
25
,
M.SCAN
)
A˜B
p
p
MUSIC SYNC
T.REC
REC LEVEL
CLEAR
MENU SELECT
EN
27