Recording Over Existing Tracks - Sony MDS-JA30ES Operating Instructions Manual

Recording on MDs
Playing back tracks just recorded
Do this procedure to immediately play back tracks that
have just been recorded.
Press ( immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after
recording
1 Press p again after stopping recording.
2 Press (.
Playback starts from the first track of the MD.
12 EN

Recording Over Existing Tracks

Follow the procedure below to record over existing
material just as you would on an analog cassette tape.
POWER
g
TIMER
REC OFF PLAY
SCROLL/ DISPLAY/
INPUT
FILTER CLOCK SET CHAR
PHONES PHONE LEVEL OPT1
OPT2 • COAX
ANALOG
PLAY MODE REPEAT TIME
0 10
1
Do Steps 1 to 4 in "Recording on an MD" on page
8.
2 Turn AMS (or press = or +) until the
number of the track to be recorded over appears.
3
To record from the start of the track, continue
from Step 5 in "Recording on an MD" on page 9.
z
While "TR" flashes in the display
The deck is recording over an existing track, and stops
flashing when it reaches the end of the recorded
portion.
z
To record from the middle of the track
1 After Step 2 above, press ( to start playback.
2 Press P where you want to start recording.
3 Continue from Step 5 in "Recording on an MD" on
page 9.
Note
You cannot record from the middle of an existing track when
the "PROGRAM" or "SHUFFLE" is on.
≠ AMS ±
EDIT/ ≠ AMS ± DIGITAL ANALOG
REC LEVEL
NO YES 0 5
4 6
3 7
0 )
2 8
1 9
– + 0 10
PUSH ENTER L R
§ ( P p r
OPEN/CLOSE REC