Sony MDS-W1 Operating Instructions Manual page 24

Playing MDs
When you insert an MD, the disc name, total number
of tracks and total disc playing time appear in the
display as follows:
(The display below shows detail screen for deck A.)
Total number of tracks
Disc name
Track number
and track title
Checking the playing time, remaining time,
and track number
Each time you press A TIME/CHAR or
B TIME/CHAR (or TIME after selecting the deck by
pressing DECK A or DECK B) while playing an MD,
you can change the display as follows:
(The display below shows detail screen for deck A.)
Track number and playing time of the current
track
Track number and remaining time of the
current track
Next track to be played
The bar in the display "
of the current track has been played back.
z
The deck displays the disc and/or track title* any
time
If no title is recorded, "No Name" appears instead of a
title.
To label a recordable disc and its tracks, see "Labeling
Recordings" on page 37.
* Only when the dislpay shows detail screen for deck A
or B.
EN
24
Total disc playing time
Playing time of
each track
Press
Press
" indicates how much
z
You can scroll a title of 8 or more characters (in
A/B divided screen) or 17 or more characters (in
detail screen for deck A and B) Z
Press SCROLL.
Since the display shows up to 7 characters (in A/B
divided screen) or 16 characters (in detail screen for
deck A and B) at a time, press SCROLL to see the rest of
the title if the title has 8 (or 17) characters or more.
Press SCROLL again to pause scrolling, and again to
continue scrolling.
Displaying the recording date Z
When the internal clock has been set, the deck
automatically records the recording date and time of
all recordings. You can then check the recording date
and time of a track.
1
Locate the track for which you want to check the
recording date and time.
When the deck is
stopped
playing or on play pause
2
Press DATE RECORDED.
" No Date!!" appears if the internal clock has
not been set or the track was recorded on another
MD deck without a date and time stamp function.
Press
= or +
=, +, or number buttons