Motion Detect - C2Max XTREME HD User Manual

e. Motion Detect
We recommend you setup each channel individually to get the best results.
Channel – each channel can be setup differently
Enable – you can manually enable and disable motion detect
1. Click on Setup next to Region
2. You should now see a grid overlay over the selected camera image, at default the
whole area will have a coloured overlay which will be for Region 1
3. Unselect the area using the click and drag method that you do not want to detect,
this area will then be clear
4. Set your sensitivity on the Region 1 tab, this value has a parameter of 0~100. The higher
the value the more sensitive it will be. The Sensitivity is set globally for the channel on
the Region 1 tab
5. Set the Threshold per region, this setting has a parameter of 0~100. The lower the value
the more sensitive it will be
6. Right click to exit the region screen
7. Click Apply to save your changes
22
Region – in the setup screen you can select
the areas of the image that you want to
enable for motion.
The clear areas will not activate motion
detection and the highlighted areas will turn
on motion detection.
You can set up to four different regions for
each channel where levels overlap the
higher settings will be used.
www.c2max.com