Table of Contents
Advertisement
g. Camera Toolbar
The camera toolbar is used to perform quick actions on a specific channel when in live view
mode. To access the camera toolbar move the mouse to the top centre of the channel and it
will display options like this:
Realtime Playback
This function allows you to view the last 5~60 minutes of video from that selected channel.
To operate this function just click and it will playback recorded video (if available)
from 5 minutes ago.
NOTE: At default the recorder will playback from 5 minutes ago, this can be increased up to
60 minutes by changing the value of 'Real time Play' in Settings > General
Digital Zoom
•
Press the button to enable digital zoom on the channel the icon
will then change to
•
Click and drag a box around the area you want to zoom in on
•
Click and drag to pan the selected zoom
•
Right click to reset back to full view
•
Click again to disable digital zoom, the selected area will be at the
same zoom until you right click inside the channel.
NOTE: You can use digital zoom on multiple channels at the same time.
Using the digital zoom does not affect the recorded video.
Realtime Backup
This function allows you to record live video of the selected channel directly onto a USB
device (not included)
1. Insert the USB backup device into one of the USB ports on the device
2. Click on the button to begin the real-time backup, the icon will change to
if successful.
3. Click again to stop the real-time backup.
10
NOTE: You may need to login into
your system and have rights to use
these functions.
www.c2max.com
Advertisement
Table of Contents
