Submenu Automatic Input Test; Submenu Sewing Motor Test; Submenu Step Motor Test; Submenu Ram Test - DURKOPP ADLER 540-100-1 Manual Complete

4.3.1.3 Submenu Automatic input test

4.3.1.4 Submenu Sewing motor test

4.3.1.5 Submenu Step motor test

No. Parameter name
T3.1.4.1 X-axis
T3.1.4.2 Y-axis

4.4.1.6 Submenu RAM test

4.4.1.7 Submenu EPROM test

14
The changes of the state of all inputs are displayed automatically.
–
Press the OK key in order to start the sewing motor. The sewing
motor speed is displayed.
With the cursor keys ñ and ò the speed can be altered in steps of
–
100 rpm within the speed limits.
–
Press the ESC key in order to stop the sewing motor.
Symbol Range
-50 ... 50
-50 ... 50
–
Press the ESC key in order to quit the menu item again.
The step motor is referenced anew.
When selected the SRAM is tested for errors. The result is indicated in
the display.
When selected the EPROM is tested. The following values are
displayed:
–
ROM size
–
Machine class
–
Software version
–
Software date
–
Check sum
Description
With the cursor keys ï and ð the
step motor is moved in the
corresponding direction by 5 ticks
each.
With the cursor keys ñ and ò the
step motor is moved in the
corresponding direction by 5 ticks
each.