Control Connection To Main Switch - DURKOPP ADLER 540-100-1 Manual Complete

6.4 Control connection to main switch

2
5
18
CAUTION !
All work that needs to be carried out on the electrical installation of the
linen buttonhole automat is only allowed to be carried out by an
electrician or other qualified personal.
The mains plug is to be unplugged!
1
–
Remove rotary knob 1.
To do this loosen the screw 2 in the rotary knob.
–
Remove the cover 3 from the main switch.
To do this use a screwdriver to unlock the latch in bore hole 4.
–
Place the cable from the control box in the cable channel.
–
Feed the cable into the main switch.
–
Connect the cable cores of the control box to the screws "T1" and
"T2".
–
Connect the earth connection of the control box to the main switch.
–
Refit the cover to the main switch.
–
Refit the rotary knob and tighten it.
4 3