F-Customer Service Parameters; G-Adjusting Thermostat Set Point - Traulsen G Series Owner's Manual

VII. f - CUSTOMER SERVICE PARAMETERS:
Listed below are the available parameters in the order they appear, use the down arrow key on the controller to sequence
through their position. You can use either the up or down arrow keys to scroll through the options.
Thermostat Set Point*
Thermostat Set Point Differential
Temperature Scale
Time (24-hour clock)
Date (month - day - year)
Daylight Savings
Start Manual Defrost
Defrost Lockout 1
VII. g - ADJUSTING THE THERMOSTAT SET POINT:
This parameter sets the low point of the desired cabinet temperature range. Typically, freezers will range from -3° F to 0° F
(-19° C to -18° C) and refrigerators will range from 35° F to 38° F (2° C to 4° C) for this parameter setting. This parameter
is preset at the factory and does not require adjustment unless the customer chooses to do so.
Follow the instructions to enter the customer access code on page 8. When the control
display reads
Use the arrow keys
When the display shows the temperature you want press the set button
The display will then read
You can use the up or down arrow keys to scroll to the next parameter
or wait 30 seconds for the control to return to normal operation.
VII. MICROPROCESSOR CONTROL (cont'd)
Thermostat Set Point. Press the set button
to adjust the temperature to your desired setting.
Thermostat Set Point.
Defrost Lockout 2
Defrost Lockout 3
Defrost Lockout 4
Room Temperature Offset
Dewpoint Compensation Factor
Evaporator Coil Sensor Temperature
Cabinet Air Temperature
Cabinet Serial Number
.
SET
SET .
-9-