Q-Hot Food Units - Adjusting The Thermostat; R-Hot Food Units - Turning The Unit Off; S-Hot Food Units - Temperature Adjustment - Traulsen G Series Owner's Manual

VII. MICROPROCESSOR CONTROL (cont'd)
VII. q - HOT FOOD UNITS, ADJUSTING THE THERMOSTAT:
This parameter sets the desired cabinet temperature. Please note that hot food units are delivered from the factory set to
the OFF position.
Follow the instructions to enter the customer access code on page 8. When the control reads
Thermostat Set Point , press the set button .
SET
Use the arrow keys to adjust the temperature to your desired setting. When the display shows the tem-
perature you want press the set button . The display will then read Thermostat Set Point. You can use
SET
the up or down arrow keys to scroll to the next parameter or press the alarm cancel button to exit.
VII. r - HOT FOOD UNITS, TURNING THE UNIT OFF/ON:
After the temperature has been set, the customer can continuously turn the unit OFF and then back ON to the same tem-
perature. To turn the unit ON /OFF press the alarm cancel button , (please note that this feature is not available
on versions of the control manufactured prior to September 2000), or if an alarm warning condition is present, use the
alternative ON/OFF activation method.
To turn the unit ON/OFF using the alternative method, press both arrows at the same time, the set tempera-
ture will remain in memory.
VII. s - HOT FOOD UNITS, TEMPERATURE ADJUSTMENT:
SET
Press the SET button and the UP ARROW button at the same time. The display will flash the current tem-
perature setting or OFF (if the unit is turned off). Use the UP or DOWN ARROW buttons to adjust your
desired temperature setting (temperature range is 140° thru 180° F, and OFF) then press the SET button . The
SET
display will go back to reading cabinet temperature. If OFF is selected. the display will then read OFF. NOTE: If you
wish to change the set temperature at anytime follow this procedure. These models also include a "One-Time Tempera-
ture Setting Adjustment" feature. Upon start-up, the unit will warm-up to the last temperature you had set for it, unless
changed.
-16-