K-Setting The Date; L-Setting Daylight Savings Time - Traulsen G Series Owner's Manual

VII. k - SETTING THE DATE:
T
he date must be set in order for the daylight savings time mode to function correctly. Follow the instructions to enter the
customer access code on page 8. When the control displays
until the control display reads
(year). The right two numbers will be flashing. Press the arrow keys
year is displayed, press the set button
flashing. Use the arrow keys
ton . The display will show
SET
to set the day.
read Date. You can use the up or down arrow keys
seconds for the control to return to normal operation.
VIII. l - SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. To disable
follow the instructions to enter the customer access code on page 8. When the control displays
Set Point, press the down arrow key
ton . The display will show
SET
Time). For "YES," press the set button
read Daylight Savings Time (no). Press the set button
Time. You can press the the up or down arrow keys
the control to return to normal operation.
VII. MICROPROCESSOR CONTROL (cont'd)
Date. Press the set button
SET
. The display will show
to set the month.
(day). The right two numbers will be flashing. Press the arrow keys
When the correct day is displayed, press the set button
until the display reads
Daylight Savings Time (Yes, automatically adjust for Daylight Savings
, for "NO" press the up or down arrow key
SET
Thermostat Set Point, press the down arrow key
. The display will show
SET
(month). The right two numbers will be
When the correct month is displayed, press the set but-
to scroll to the next parameter, or wait 30
Daylight Savings Time. Press the set but-
. The display will read
SET
to scroll to the next para-meter or wait 30 seconds for
-12-
to set the year. When the correct
. The display will then
SET
Thermostat
. The display will
Daylight Savings