M-Starting A Manual Defrost - Traulsen G Series Owner's Manual
Reach-in & pass-thru refrigerators, reach-in & pass-thru hot food holding cabinets, reach-in freezers, hinged glass door refrigerators (for equipment produced after 01-2010 only)
Hide thumbs
Also See for G Series:
- Service manual (78 pages) ,
- Manual (55 pages) ,
- Owner's manual (20 pages)
Table of Contents
Advertisement
VII. MICROPROCESSOR CONTROL (cont'd)
VII. m - STARTING A MANUAL DEFROST CYCLE:
This parameter allows a service technician to start a defrost cycle at any time. This parameter will override any lockout
settings.
Follow the instructions to enter the customer access code on page 8. When the control
displays
Thermostat Set Point, press the down arrow key
until the control
display reads
Start Manual Defrost.
SET
Press the set button
.
The display will show
(OFF).
Press either arrow key
(ON).
The display will show
.
SET
Press the set button
.
The display will then read
Start Manual Defrost.
You can use the up or down arrow keys
to scroll to the next parameter
or wait 30 seconds for the control to return to normal operation.
°F
°C
The defrost icon (snow flake) will be lit, and the display will read
SET
when the unit is in defrost.
DEFROST ICON
FREEZER
-13-
Hide quick links:
Advertisement
Table of Contents
