Master Eq (Page 6) - Roland V-Drums TD-50 Data List

Drum sound module
Hide thumbs Also See for V-Drums TD-50:
Table of Contents

Advertisement

MASTER EQ (page 6)

This is a four-band equalizer that is provided for each drum kit.
You can adjust the equalizer's effect (shelving and peaking) for the low frequency (LOW) and high frequency (HIGH).
The master EQ is not output from the MASTER OUT jacks and PHONES jacks.
Parameter
[F4] button
Type
Q
Freq
Gain
* If the routing setting (p. 29) Master Out is set to "DIRECT, " the effect of the master EQ does not apply to the sound that is output from the MASTER OUT jacks.
MEMO
To return to the default values, press the [F5] (DEFAULT) button.
This indicates whether the master EQ effect is output (
each jack or is not output (
MST: MASTER OUT jacks
PHO: PHONES jacks (always output)
Value
OFF, EQ ON
SHELV (Shelving),
PEAK (MID1 and MID2: fixed to
"PEAK")
0.5–8.0 (only when Type is set to
"PEAK")
20 Hz– 1 kHz (LOW)
20 Hz–16 kHz (MID1, 2)
1 kHz–16 kHz (HIGH)
-12–+12 dB
).
Explanation
Turns master EQ on/off.
Type of equalizer
Width of the frequency range
A higher Q narrows the affected area.
Center frequency
Amount of boost/cut
KIT CUSTOMIZE
) from
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents