Roland V-Drums TD-50 Data List page 7

KICK A
Parameter
INST tab
Shell Depth
Head Type
BASIC 1 tab
Tuning
Muffling
Beater Type
BASIC 2 tab
Snare Buzz
Low Level
Low Decay
ADVANCED tab
Kit Resonance
SNARE A/CROSS STICK/SNARE BRUSH
Parameter
INST tab
Shell Depth*1
Head Type*1
BASIC 1 tab
Tuning
Muffling
Overtone*1, *2
BASIC 2 tab
Strainer Adj.*2
Wire Type*2
Wire Level*2
ADVANCED tab
XStick Inst*3
XStick Inst Volume*3
*1 Unavailable if the instrument group is CROSS STICK.
*2 Unavailable if the instrument group is SNARE BRUSH.
*3 Only if the SNARE A/CROSS STICK instrument is assigned to the rim of the snare (or to the rim of a digitally connected pad that is assigned to snare)
* PINSTRIPE is a registered trademark of Remo Inc., U.S.A.
Value
1.0–30.0
CLEAR, COATED, PINSTRIPE
-100–100
OFF, TAPE1–4, BLANKET1–3, WEIGHT1, 2 Muffling (muting) setting
FELT1, 2, WOOD, PLASTIC1, 2
OFF, 1–8
-5–NORMAL–+5
-2–NORMAL–+2
OFF, 1–8
Value
1.0–30.0
CLEAR, COATED, PINSTRIPE
-100–100
OFF, TAPE1–7, DONUT1, 2
-5–NORMAL–+5
LOOSE1–3, MEDIUM1–3, TIGHT1–3
TYPE1–3
-4–NORMAL–+5
1–5
-INF–+6.0 dB
Explanation
Depth of the shell
Type of head
Tuning of the head
Type of beater
Resonance to the snare
Volume of low-frequency sound
Decay length of low-frequency sound
Amount of resonance for the entire drum kit
Explanation
Depth of the shell
Type of head
Tuning of the head
Muffling (muting) setting
Amount of overtone components
Tension of the strainer (resonating cords)
Type of strainer
Volume of strainer
Cross-stick sound selection
Cross-stick sound volume
MEMO
The "XStick Volume" can also be edited from the MIXER DRUM KIT VOLUME screen (KIT VOL tab)
of the MIXER (p. 13).
KIT CUSTOMIZE
7