Eq/Dynamics Screen - Roland VR-50HD MK II Reference Manual

Menu List

EQ/Dynamics Screen

EQ
Here you can make settings for the four-band parametric equalizer. It lets you shape the character of the sound by boosting or cutting four
frequency regions.
Menu item Value
(bold text: default value)
MAIN Adjusts the main output audio.
MAIN OFF, ON
High -15.0–0 0– +15.0dB
0–20.0kHz
Frequency 1.0–10
Hi-Mid -15–0– +15dB
0kHz–20.0kHz
Frequency 20.0Hz–2
Q 0.3–1 0–16.0
Lo-Mid -15–0– +15dB
Frequency 20Hz–500Hz–20.0kHz
0–16.0
Q 0.3–1
Low -15–0– +15dB
Frequency
20Hz–100Hz–2.0kHz
AUX 1 (*5) Adjusts the audio of the AUX 1 bus.
ON
AUX 1 OFF,
AUX 2 (*5)
Adjusts the audio of the AUX 2 bus.
ON
AUX 2 OFF,
(*5) Other menu items are the same as for "MAIN. "
Dynamics
Here you can make compressor and limiter settings.
Menu item Value
(bold text: default value)
MAIN
Adjusts the main output audio.
MAIN OFF, ON
Selects the compressor or limiter.
Comp Comp
Lim
Lim
Comp
-50– -8–0dB
Threshold
1.00 : 1, 1.12 : 1, 1.25 : 1
1.40 : 1, 1.60 : 1, 1.80 : 1
2 50 :
Ratio 2.00 : 1,
4.00 : 1, 5.60 : 1, 8.00 : 1
16.0 : 1, INF : 1
Attack
0.0–30–100ms
Release 30–250–5000ms
Makeup
-40–0–40dB
Lim
Threshold -50– -6–0dB
Output -40–0–40dB
Attack 0–100ms
Release 30–500–5000ms
Soft OFF, ON
AUX 1 (*6)
Adjusts the audio of the AUX 1 bus.
AUX 1 OFF, ON
AUX 2 (*6) Adjusts the audio of the AUX 2 bus.
AUX 2 OFF, ON
(*6) Other menu items are the same as for "MAIN. "
42
([MENU] button0Audio <EQ/Dynamics> 0 <Edit>)
Explanation
Turns the equalizer on/off.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the tone quality in the high band.
Boosts or attenuates the high-midrange band.
Adjusts the center frequency when changing the tone quality in the high-midrange band.
Adjusts the width of the frequency band when boosting or attenuating high-midrange band.
Boosts or attenuates the low-midrange band.
Adjusts the center frequency when changing the tone quality in the low-midrange band.
Adjusts the width of the frequency band when boosting or attenuating low-midrange band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the tone quality in the low band.
Turns the equalizer on/off.
Turns the equalizer on/off.
Explanation
Turns the compressor or limiter on/off.
This is a compressor. Audio that exceeds the specified threshold level is compressed. This reduces the difference
between the maximum volume and minimum volume, making the audio more comfortable for listening.
This is a limiter. Compresses the audio so that the mixed audio does not exceed the specified threshold level.
* Distortion will occur if audio that exceeds the allowable range of the limiter is input.
Specifies the level used as the threshold at which the compressor is applied. Compression is applied to audio
that exceeds the threshold.
Specifies the degree of compression applied to the audio. The state in which no compression is applied is
1, 3.20 : 1
defined as "1. "
Adjusts the time from when audio exceeding the threshold is input until when compression begins.
Adjusts the length of time until compression ends after audio falls below the threshold.
Adjusts the output volume level after applying the compressor.
Specifies the level used as the threshold at which the limiter is applied. Compression is applied to audio that
exceeds the threshold. The output volume is limited to below the threshold.
Adjusts the output volume level after applying the limiter.
Adjusts the time from when audio exceeding the threshold is input until when compression begins.
Adjusts the length of time until compression ends after audio falls below the threshold.
If this is "ON, " reduces the distortion that can be noticeable when the limiter effect is applied to an extreme
extent.
Turns the compressor or limiter on/off.
Turns the compressor or limiter on/off.