Trig Monitor (Page 3) - Roland V-Drums TD-50 Data List

TRIGGER
Parameter
POSITION tab
Trig Type
Position Detect*2
Head
Rim
*1 Only when Trig Type is set to "RT30K" or "RT30HR"
*2 For some Trig Type settings, this cannot be specified.
MEMO
To return to the default values, press the [F5] (DEFAULT) button.
The following parameters do not return to their default values when you change the Trig Type or press the [F5] (DEFAULT) button.
5 Hi-hat parameters
5 Offset
5 Foot Splash Sens
5 Noise Cancel
5 CC MAX
5 XStick Threshold
5 XTalk Cancel Rate

TRIG MONITOR (page 3)

Parameter
XTALK tab
XTalk Cancel Rate
26
Value Explanation
This is the same parameter as Trig Type (p. 22) in the BANK tab.
Positional sensing on/off
If you turn strike position detection on, you'll be able to produce tonal change by varying the strike position on the head or by changing
the nuance of your rim shots.
OFF, ON Turns head strike position detection on/off
OFF, ON Turns rim strike position detection on/off
Value
0–80
Explanation
Strength of crosstalk cancellation
Reference
For details on how to make these settings, refer to "Reference Manual. "