Mic Position (Page 2); Transient (Page 3) - Roland V-Drums TD-50 Data List

RIDE
Parameter
INST tab
Size
Thickness
BASIC 1 tab
Muffling
Sizzle Type
Sizzle Amount
BASIC 2 tab
Ping Color*1
Ping Level*1
*1 For some instruments, these settings are not available.

MIC POSITION (page 2)

You can edit the mic position and volume for each instrument.
* For some instruments, these settings are not available.
Parameter
MIC POS tab
Mic Position
ELEMENT tab
Overhead
Room
WIDTH tab
Mic Width

TRANSIENT (page 3)

You can adjust the attack and release (transient) for each instrument.
* For some instruments, these settings are not available.
Parameter
[F4] button
Time ([R1] knob)
Attack ([R2] knob)
Release ([R3] knob)
Gain
Value
1.0–40.0
THIN-5–STANDARD–THICK +5
OFF, TAPE1–19
OFF, RIVET, CHAIN, BEADS
-3–+3
LIGHT2, 1, STANDARD, HEAVY1, 2
-4–NORMAL–+5
Value
OUTSIDE4–STANDARD–INSIDE4
-INF–+6.0 dB
-INF–+6.0 dB
-5–+5
Value
OFF, TRANSIENT ON
1–10
-100–+100
-100–+100
-12.0–+6.0 dB
Explanation
Cymbal diameter
Thickness of the cymbal
Muffling (muting) setting
Type of sizzle
Amount of sizzle
Tonal character of the ride's ping sound
Volume of the ride's ping sound
Explanation
Tonal change caused by mic position
Volume of overhead mic
Volume of room mic
Spread of the overhead mic and room mic
Explanation
Turns the transient effect on/off.
Time over which the attack changes
Adjustment of the attack
Adjustment of the release
Volume following transient adjustment
KIT CUSTOMIZE
9