Click - Roland V-Drums TD-50 Data List

CLICK

1
Press the [CLICK] button.
The CLICK screen appears.
Parameter
[F5] button
TEMPO tab
Tempo*1
Beat*1
Rhythm
SOUND tab
Sound
Level
LED Ref
OTHER tab
Click Pan
Amb(Reverb)Send
Tap Sw
Tap Pad
*1 This cannot be changed while playing back a drum performance data song (p. 46) or recorded data.
Quiet Count settings
1
In the CLICK screen, press the [F4] (QUIET CNT) button.
2
Press the [F2] (SETUP) button.
The setting screen appears.
3
Use cursor buttons to select a parameter, and use the [–] [+] buttons or the dial to edit the value.
Parameter
Measures
Quiet
Value
OFF, ON
20–260
1–9
–
METRONOME, CLICK, VOICE, BEEP 1,
BEEP 2, TEK CLICK, STICKS, CLAVES,
WOOD BLOCK, COWBELL, TRIANGLE,
TAMBOURINE, MARACAS, CABASA
-INF–+6.0 dB
OFF, ON
L30–CTR (CENTER)–R30
-INF–+6.0 dB
OFF, ON
KICK–PREVIEW
Value
2, 4, 8, 16 (Measures)
Of the measures specified by "Measures, " this setting specifies the length of the measures that will be "Quiet. "
RANDOM
1, 2, 4
Explanation
Turns click on/off.
Tempo
Number of beats per measure
Interval of the click
Sound for the click
Volume of click
Specifies whether the [CLICK] button blinks in time with the click (ON) or does not blink (OFF).
Stereo position of the click
Depth of ambience reverb
Applying ambience reverb makes the click easier to hear.
MEMO
The effect specified by the ambience reverb setting is applied. This means that reverb must be
turned on (p. 12).
You can specify the tempo by striking the pad specified by Tap Pad or by pressing a button
(Tap Tempo).
Select the pad or button that can be struck or pressed to set the tap tempo.
Explanation
Specify the length (measures) of the interval for which the click will alternate between "Sounding"
and "Quiet. "
The length of the Quiet interval will randomly change each time.
Specifies the length (number of measures) of the Quiet interval.
* This setting cannot be longer than half of the Measures value.
21