Setup; Output; Pad Output (Page 1) - Roland V-Drums TD-50 Data List

SETUP

1
Press the [SETUP] button.
The SETUP MENU screen appears.
2
Use the PAGE [UP] [DOWN] buttons and the function buttons to select the setup menu that you want to edit.
Setup menu

OUTPUT

USB AUDIO
OPTION
CONTROL
MIDI
AUTO OFF
INFO
FACTORY RESET
3
Edit the settings of the menu that you selected.
Reference
For details on operations in the setup menu, refer to "Reference Manual" (PDF).
OUTPUT

PAD OUTPUT (page 1)

Parameter
MASTER tab
PAD OUTPUT ASSIGN MASTER
DIRECT tab
PAD OUTPUT ASSIGN DIRECT
MONITOR tab
Monitor the output volume of each jack.
MEMO
If you want to return to the default values, press the [F4] (DEFAULT) button. If the [F2] (DIRECT) button is selected, pressing the [F4] (DEFAULT) button lets you select the default
values (factory-set state) or an additional output setting (STEREO ALL) (supported starting with program version 1.05).
Use the cursor buttons to select "DEFAULT" if you want to return to the default values (factory-set state) or "STEREO ALL" if you want to select the other output setting; then press
the [F5] (RESET) button.
Explanation
Specifies the output destination of the sounds.
Makes USB audio settings.
Makes settings for the [PREVIEW] button, the MIX IN jacks, and the display.
Assigns functions to the footswitch and pads.
Makes MIDI settings.
Makes AUTO OFF settings.
Displays information about the TD-50 itself, such as the program version.
Returns the TD-50 to its factory settings.
Reference
For details on the factory reset operation, refer to "Reference Manual" (PDF).
Value
PHONES (MASTER OFF),
PHONES+MASTER LR
OFF, 1, 2, 1+2, 3, 4, 3+4, 5, 6, 5+6, 7,
8, 7+8, MASTER DIRECT L, MASTER
DIRECT R, MASTER DIRECT L+R
Explanation
Specifies each pad's output from the PHONES jacks and the MASTER OUT jacks (when Master Out
(p. 29) is "NORMAL").
Specifies each pad's output from the DIRECT OUT 1–8 jacks and the MASTER OUT jacks (when
Master Out (p. 29) is "DIRECT").
Page
p. 27
p. 30
p. 30
p. 31
p. 32
p. 33
p. 33
–
27