Control - Roland V-Drums TD-50 Data List

CONTROL

Parameter
FOOT SW tab
Foot Switch 1 Func(SW1),
Foot Switch 2 Func(SW2)
PAD CTRL tab
Aux3 Head Func,
Aux3 Rim Func
Aux4 Head Func,
Aux4 Rim Func
Functions that you can assign to a footswitch or pad
Value
OFF
KIT# INC
KIT# DEC
SETLIST# INC
SETLIST# DEC
SONG# INC
SONG# DEC
SONG PLAY
SONG STOP
SONG TOP
SONG PLAY/STOP
*1 If the trigger input (p. 22) of a digitally-connected pad (such as the PD-140DS) is assigned to snare, "XSTICK ON/OFF" has no effect.
Value
See below
See below
Explanation
No function is assigned.
Calls up the previous kit.
Calls up the next kit.
Calls up the previous set list.
Calls up the next set list.
Calls up the previous song.
Calls up the next song.
Play the song.
Stop the song.
Return to the beginning of the song.
Play/stop the song.
Explanation
Assigns a function to a footswitch (separately sold: BOSS FS-5U, FS-6) connected to the TD-50.
Connecting an FS-5U
Stereo 1/4" phone type
1/4" phone type x 2
RING
SW 1 SW 2
* If you use a mono cable to connect a single FS-5U, it will operate as SW 2.
* The FS-5L cannot be used.
Connecting an FS-6
Stereo 1/4" phone type
Stereo 1/4" phone type
SW 1
SW 2
Assigns functions to a pad connected to TRIGGER IN jack 13/AUX3.
You can assign separate functions to the head and to the rim.
Assigns functions to a pad connected to TRIGGER IN jack 14/AUX4.
You can assign separate functions to the head and to the rim.
Value
SONG AB REPEAT
MFX 1 ON/OFF
MFX 2 ON/OFF
MFX 3 ON/OFF
XSTICK ON/OFF*1
FIXED HH ON/OFF
ALL SOUND OFF
TIP
POLARITY switch
MODE/POLARITY switch
Explanation
Specifies A-B repeat.
Turns on/off the multi-effect 1.
Turns on/off the multi-effect 2.
Turns on/off the multi-effect 3.
Switches between sounding or not sounding
the cross-stick sound.
Switches between setting the hi-hat Fixed
(p. 8) to "CLOSE" or not.
Stops the currently-sounding drum
performance sound or user sample playback.
SETUP
31