Table of Contents
Advertisement
Installing the 1U Slim Rail Rack Mount Kit for Four-Post Racks (XBR-000291)
FIGURE 14 Rack kit parts
1.
Bracket, front right (1)
2.
Bracket, front left (1)
3.
Bracket, rear left (1)
4.
Bracket, rear right (1)
5.
Screw, 8-32 x 5/16 in., panhead Phillips (10)
NOTE
Not all parts may be used with certain installations depending on the device type.
CAUTION
Use the screws specified in the procedure. Using longer screws can damage the
device.
Attaching the front brackets
Complete the following steps to attach the front brackets to the device.
32
6.
Screw, 6-32 x 1/4 in., panhead Phillips (8)
7.
Screw, 10-32 x 5/8 in., panhead Phillips (8)
8.
Retainer nut, 10-32, (for square-hole rack rails) (8)
9.
Retainer nut, 10-32, (for round-hole rack rails) (8)
ExtremeSwitching VDX 6740 Hardware Installation Guide
9036108-00
Advertisement
Table of Contents
