Table 26 - Printout Types - York YVAA Installation, Operation & Maintenance Instructions Manual

FORM 201.28-NM1.1
ISSUE DATE: 1/31/2018
Print Key Operation
The PRINT key is used to initiate a printout of cur-
rent operating data (real time data), a complete history
printout of all history (fault) buffers, a printout of all
normal shutdowns (compressor cycling, chiller shut-
down, and so on) or history (fault) data printout of a
specific fault. History Buffer 1 will always be the most
recent fault history printout. Printing may also be can-
celed by selecting the CANCEL PRINTING option.
The following message is displayed when the PRINT
key is pressed.
PRINT CHOOSE PRINT REPORT
◄ ► XXXXXXXXXXXXXXXXXXXXX
After pressing the PRINT key, the printout type is
selected by pressing the ◄ (LEFT ARROW) or ►
(RIGHT ARROW) keys until the desired printout is
displayed.
JOHNSON CONTROLS
PRINT KEY
The following table shows the available printout types.

TABLE 26 - PRINTOUT TYPES

The specific printout is initiated by pressing the 
(ENTER) key.
SECTION 8 - MICROPANEL
PRINT
KEY
LD10605
PRINTOUT TYPES
Operating Data
(Default Selection)
All History Buffers
Normal Shutdowns
History Buffer 1
History Buffer 2
History Buffer 3
History Buffer 4
History Buffer 5
History Buffer 6
History Buffer 7
History Buffer 8
History Buffer 9
History Buffer 10
Cancel Printing
8
157