Configuring for a Block of Static IP Addresses
To set up the Modem to use a block of static
☞
Note: To complete this procedure, you must have access to the
Internet Service Provider (
been provided, contact the
1. Open the Web browser. In the address bar enter:
then press Enter on the keyboard.
2. The "Main Menu" screen appears. Select Setup/Configuration.
3. In the "Set Up/Configuration" screen, read the instructions, then select
Advanced Setup from the menu on the left side.
Actiontec DSL Modem User Manual
) worksheet. If no worksheet has
ISP
.
ISP
http://192.168.0.1
20
addresses:
IP