Table of Contents
Advertisement
802.11b/g Mode
Access to the Modem's network can be restricted to wireless clients using either the
b or
g wireless adapters. Click on the down arrow next to the text box
802.11
802.11
and select the desired option. Actiontec recommends using the "Mixed" mode (the
default option), which enables both
network.
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Server in the "Advanced Settings" screen generates the "
Selecting
DHCP
Server" screen. The Modem has a built-in
Protocol) server that automatically assigns a different
on the network, eliminating
The factory default setting is On. To disable the
Actiontec strongly recommends leaving the
Server option is Off, ensure the
on the same subnet as the
"
Server Configuration."
DHCP
Chapter 5 Configuring Advanced Settings
802.11
address conflicts.
IP
addresses of the networked computers are
IP
address of the Modem. For more information, see
IP
b and
g wireless clients to join the
802.11
(Dynamic Host Configuration
DHCP
address to each computer
IP
Server, select Off.
DHCP
Server option On. If the
DHCP
37
DHCP
DHCP
Advertisement
Table of Contents
