Table of Contents
Advertisement
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet (
) or Point-to-Point over
PPPoE
"Broadband Connection via PPPoE" screen:
"Broadband Connection via PPPoA" screen:
If a User Name and Password was entered in the Installation Buddy or during
Basic Setup, it should be displayed in the "Broadband Connection via
o
" screen. If not, enter the information now. If the
PPP
A
username or password, click in the box next to "My
name and password."
PPP Auto Connect
If
auto connect is activated (by clicking in the appropriate check box),
PPP
the Modem will attempt to automatically reconnect the
dropped or disconnected during an online session.
by default.
Actiontec DSL Modem User Manual
28
(
) protocol.
ATM
PPPoA
ISP
does not require a user-
ISP
PPP
Auto Connect is turned on
PPP
o
PPP
E/
does not require a
connection if it is
Advertisement
Table of Contents
