Configuring For A Block Of Static Ip Addresses - ActionTec GT701R User Manual

Configuring for a Block of Static IP Addresses

To set up a the Modem to use a block of static
☞
Note: To complete this procedure, the Internet Service Provider
) worksheet or welcome letter must be available to consult.
(
ISP
If no worksheet has been provided, contact the
1. Open the Web browser. In the "Address" text box type:
then press Enter on the keyboard.
2. The Home screen appears, set to the "Status" tab. Select Advanced Setup from
the row of tabs at the top of the screen
☞
Note: If the Home screen does not appear, make sure the
Ethernet cable is properly connected to the Modem.
Chapter 4 Setting up Static IP Addresses
http://192.168.0.1
addresses:
IP
21
.
ISP