Table of Contents
Advertisement
Priority
Select either "High" or "Normal" for the priority level of the type of data traffic
being configured.
Protocol
Select the data protocol type being configured here. Click on the down arrow to
reveal the options:
Set IP Precedence
To activate
Precedence, click in the appropriate box. Once activated, the user can
IP
set the
precedence level of the traffic being configured by clicking on the down
IP
arrow and selecting an option level from 1 (low priority) to 7 (high priority).
Source
Select the "Source" type ("
enter the
or
IP
MAC
netmask address in the appropriate text box. The user can also set a port range .
Destination
Select the "Destination" type ("
then enter the
or
IP
enter a "netmask" address in the appropriate text box. The user can also set a port
range.
Rule List
Once a QoS priority rule is configured, click Add. The rule will appear in the "Rule
List" text box. The user can add more rules to this list, or remove a rule by select-
ing it, then clicking Remove.
Actiontec DSL Modem User Manual
,
,
,
ALL
TCP
UDP
GRE
" for
address, "
IP
IP
address in the text box to the right. If
" for
IP
address in the text box to the right. If "
MAC
,
.
ICMP
" for
MAC
MAC
address, "
" for
IP
MAC
46
address) here, then
was selected, enter a
IP
address) here,
MAC
" was selected,
IP
Advertisement
Table of Contents
