Table of Contents
Advertisement
Unnumbered Mode/VIP Mode
If a block of public static
Unnumbered Mode by clicking in the appropriate check box. Then, enter the IP
Address and Subnet Mask in the "Gateway Address" and "Unnumbered Subnet
Mask" text boxes below "Unnumbered
Restart to make all changes permanent.
The Unnumbered Mode feature automatically configures the appropriate
ing for the
address block. The
IP
-to-
to be routed WAN
☞
Note: The
the
when purchasing a block of public static
ISP
Contact the
VIP Mode This feature is used in conjunction with Unnumbered Mode. When
Mode is activated, the Modem uses
VIP
network (
), allowing both public
LAN
configured to the
LAN
addressing. All computers using public
IP
have the public
addresses statically assigned.
IP
After configuring the settings, click Next, then click Save and Restart to make all
changes permanent.
Wireless Settings
Selecting Wireless Settings in the "Advanced Settings" screen generates the
"Wireless Settings" screen.
Chapter 5 Configuring Advanced Settings
addresses was purchased from the
IP
route will bypass
IP
, as well as
LAN
LAN
address information should be obtained from
IP
if this information was not received.
ISP
IP
simultaneously, while the
Address." Click Next, then click Save and
IP
NAT
-to-
.
WAN
for private
NAT
IP
addressing and private
server is reserved for private
DHCP
addresses with Unnumbered Mode must
IP
31
, select
ISP
IP
, enabling the public
addresses.
IP
addressing for the local area
addressing to be
IP
rout-
s
IP
Advertisement
Table of Contents
