Setting Up Static Ip Address; Configuring For A Single Static Ip Address - ActionTec DSL Modem GT701WG-QW04 User Manual

Setting Up
Static IP Address
This chapter details how to set up the Modem with a static
section explains the configuration using a single static
tion explains the configuration using a block of static
Configuring for a Single Static
To set up the Modem to use a single static
☞
Note: To complete this procedure, you must have access to the
Internet Service Provider (
been provided, contact the
1. Open the Web browser. In the address bar enter:
then press Enter on the keyboard.
2. The "Main Menu" screen appears. Select Setup/Configuration.
☞
Note: If the Main Menu screen does not appear, make sure the
Ethernet cable is properly connected.
IP
address:
IP
) worksheet. If no worksheet has
ISP
.
ISP
http://192.168.0.1
15
address. The first
IP
address; the second sec-
IP
addresses.
IP
Address
4