0623 [Amount Of Z-Fold Skew Correction]; 0624 [Amount Of Z-Fold Skew Correction: Reverse] - Ricoh Pro 8300S Operating Instructions Manual

Setting Item
[Set]

0623 [Amount of Z-fold Skew Correction]

Adjust the striking amount of paper during Z-folding skew correction when using Booklet Finisher
SR5120.
Use this if the Z-fold skew correction causes problems.
With the factory default setting of "0.0", the length of the sheets moved is set to 7 mm.
Press [ ] to reduce the length. With "-7.0", the length of sheets moved for Z-fold skew correction is
reduced to "0".
Setting Items
[Set]

0624 [Amount of Z-fold Skew Correction: Reverse]

Adjust the reverse rotation amount of registration roller during Z-folding skew correction when using
Booklet Finisher SR5120.
Use this if the Z-fold skew correction causes problems.
With the initial factory setting of "0.0", the reverse rotation is set to 3 mm.
Press [ ] to reduce the reverse rotation. With "-3.0", the reverse rotation is reduced to 0 mm.
Values
[Off]
[On]
[On: Reverse]
Default Max.
Value Value
0.0 0.0
[Finishing: Finisher 1]
Default Value
[On: Reverse]
Min.
Step
Value
-7.0 0.5
Unit
mm
73