0208 [Avoid Paper Transfer Shock Jitter: Feed Interval]; 0211 [Toner Refreshing Mode] - Ricoh Pro 8300S Operating Instructions Manual

2. Details of Menu Items in Adjustment Settings for Operators

0208 [Avoid Paper Transfer Shock Jitter: Feed Interval]

Select whether to avoid paper transfer shock jitter with feed interval.
If "1" is selected, the machine adjusts the interval between sheets to reduce jitter
throughput may be reduced when you use paper larger than A4 or 8
this setting off to improve the throughput.
Setting Items
[Setting]
*1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is
transmitted to the drum unit via the intermediate transfer belt, causing banding.
• Jitter does not occur with A4 , 8
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in 1205 [Avoid Paper Transfer Shock Jitter: Feed Interval] in "Advanced
Settings" takes precedence.

0211 [Toner Refreshing Mode]

Set the image area ratio threshold of toner refreshing mode.
In toner refreshing mode, the machine monitors the average image area ratio. If it drops below the
threshold, the machine forcibly consumes some toner to keep the toner consumption at the specified
level. If you continuously print images with a low image area ratio, the toner in the developer unit
deteriorates and may cause mottling. To prevent this, the machine can consume some toner if the
average image area ratio drops below the threshold, keeping the toner consumption at the specified
level.
By pressing [ ], toner degradation may decrease while toner consumption increases.
By pressing [ ], toner degradation increase while toner consumption decreases.
Setting Items
[Image Area Ratio Threshold]
34
Default Max.
Value Value
0 1
1
/ 14 or smaller paper.
2
Default Max.
Value Value
0 25.5
*1
. However, the
1
/ 14 . If this happens, turn
2
Min.
Step
Value
0 1
Min.
Step
Value
0 0.1
Unit
None
Unit
%